2.1 PT Programming

Required Telephone/Extension

PBX settings can be customized through system programming by using a proprietary telephone (PT) with a multiline display, such as the KX-T7636. To access system programming, the Class of Service (COS) assigned to the PT's extension must be programmed to allow system programming, or the PT must be connected to the lowest-numbered port on the card installed in the lowest-numbered slot.

Only one system programming session can be performed at a time. This means that only one user can access system programming at a time, whether through a PT or PC.

For a list of characters that can be entered during system programming, see Section 1.1.3 Entering Characters.

Buttons and Functions

Fixed Buttons

Function

T7600/IP-PT*¹

T7200/T7400*²

(Page up)

(Page down)

ENTER

—

Back to Previous Menu

(CANCEL)

SHIFT

PROGRAM

END

SELECT

FLASH

CLEAR

SECRET

*¹:

The buttons shown in this column are from the KX-T7600 series.

*²:

The buttons shown in this column are from the KX-T7400 series.

Entering System Programming Mode

Using a PT to perform system programming allows an authorized extension user to set a wide range of PBX features and parameters.
There are two levels of system programming that can be performed with a PT: administrator-level programming and user-level programming.

Administrator Level:
Allows the programming of all settings accessible through PT programming.

User Level:
Allows the programming of limited settings as permitted through PC programming.

Note
	means default value throughout this manual.

Programming Structure

Programming Number

Programming Group Title

Description

[0XX]

Basic Programming

Frequently used programming steps

[1XX]

System Management Programming

Global system parameters

[2XX]

Timer Programming

System timers

[3XX]

TRS/ARS Programming

TRS and Automatic Route Selection (ARS) programming

[4XX]

CO Line Programming

CO line and trunk group settings

[5XX]

COS Programming

Class of Service parameters

[6XX]

Extension Programming

Extension feature settings

[7XX]

Resource/Interface Programming

PBX interface and external device settings

[8XX]

SMDR & Maintenance Programming

Station Message Detail Recording (SMDR) and maintenance feature settings

[9XX]

Card Programming

Used to display the cards currently installed in the PBX, or to "delete" a card from system programming before physically removing it.

Extension Numbers (Including Feature Numbers)

KX-TDA50 Slot and Port Values

Available Slot Entry Values

Slot Number

Supported Cards

Pre-installed Super Hybrid Ports

02–04

DLC4, HLC4, PLC4, LCOT4 cards

05–07

DLC8, PLC8, SLC8 cards

08–09

DPH4 cards

Enter slot numbers as two-digit numbers (e.g. "04" for slot 4).

Available Port Entry Values

Card Type

Port Number

Related Programming

DLC4

01–04

[600] [601]

HLC4

01–04

PLC4

01–04

DLC8

01–08

PLC8

01–08

DPH4

01–04

[72x]

LCOT4

01–04

[40x] [41x] [450]

Pre-installed Super Hybrid Ports

01–04

[600] [601]

Enter values as two-digit numbers (e.g. "04" for port 4).

KX-TDA100/KX-TDA200/KX-TDA600 Slot and Port Values

Available Slot Entry Values

KX-TDA100/KX-TDA200

PBX Model

Slot Number

Supported Cards

KX-TDA100

01–06

All cards

KX-TDA200

01–11

Enter slot numbers as two-digit numbers (e.g. "04" for slot 4).

KX-TDA600

Slot Number

Supported Cards

101–110

All cards

201–211
301–311
401–411

Enter slot numbers as three-digit numbers of the form "XYY":

•	X: Shelf number (1-4)
•	YY: Slot number (01-11)

Available Port Entry Values

Card Type

Port Number

Related Programming

DHLC8

01–08

[600] [601]

DLC8

01–08

DLC16

01–16

DPH4

11–34*

[72x]

LCOT8 (KX-TDA100/KX-TDA200 only)

01–08

[400] [409] [41x] [450]

LCOT16 (KX-TDA100/KX-TDA200 only)

01–16

ELCOT16 (KX-TDA600 only)

01–16

Enter values as two-digit numbers (e.g. "04" for port 4).

Enter card number and port number as single-digit numbers (e.g. "34" for card 3, port 4).

[001] System Speed Dialing Number

[002] System Speed Dialing Name

[003] Extension Number

Notes
	•	Extensions that will have a mailbox using a VM in DPT integration must have extension numbers of 2–4 digits.
	•	Extension numbers of PSs can be a maximum of 4 digits.
	•	If PC Phone, PC Console, or a CTI application is running on a PC connected to an extension whose extension number is to be programmed/modified, quit the application first.

[004] Extension Name

[005] Extension Personal Identification Number (PIN)

WARNING
	There is a risk that fraudulent telephone calls will be made if a third party discovers a personal identification number (PIN) (verification code PIN or extension PIN) of the PBX. The cost of such calls will be billed to the owner/renter of the PBX. To protect the PBX from this kind of fraudulent use, we strongly recommend:

a)	Keeping PINs secret.
b)	Selecting complex, random PINs that cannot be easily guessed.
c)	Changing PINs frequently.

[006] Operator Assignment

[007] DSS Console Paired Telephone

Note
	This program is only available after the port connected to the DSS Console is assigned as "DSS Console" in [601] Terminal Device Assignment. If one or more SDN buttons have been set at the DSS Console, they must be deleted before this setting can be changed (KX-TDA100/KX-TDA200/KX-TDA600 only).

[008] Absent Message

For default values, see "1.1.1 Absent Message" in the Feature Manual.

[100] Flexible Numbering

For default values, see "1.6.4 Flexible Numbering/Fixed Numbering" in the Feature Manual.

[101] Time Service Switching Mode

[102] Time Service Starting Time

[103] Idle Line Access (Local Access)

[110] System Password for Administrator—for PT Programming

[111] System Password for User—for PT Programming

[112] Manager Password

[120] Verification Code

[121] Verification Code Name

[122] Verification Code Personal Identification Number (PIN)

WARNING
	There is a risk that fraudulent telephone calls will be made if a third party discovers a personal identification number (PIN) (verification code PIN or extension PIN) of the PBX. The cost of such calls will be billed to the owner/renter of the PBX. To protect the PBX from this kind of fraudulent use, we strongly recommend:

a)	Keeping PINs secret.
b)	Selecting complex, random PINs that cannot be easily guessed.
c)	Changing PINs frequently.

[123] Verification Code COS Number

[190] Main Processing (MPR) Software Version Reference

[200] Hold Recall Time

[201] Transfer Recall Time

[203] Intercept Time

[204] Hot Line Waiting Time

[205] Automatic Redial Repeat Times (KX-TDA100/KX-TDA200/KX-TDA600 only)

[207] Door Unlock Time

[208] Call Duration Count Starting Time for LCOT

[209] DISA Delayed Answer Time

[210] DISA CO-to-CO Line Call Prolong Time

[211] DISA Intercept Time

[300] TRS Override by System Speed Dialing

[301] TRS Denied Code

[302] TRS Exception Code

[303] Special Carrier Access Code

[304] Emergency Number

[321] ARS Leading Number

[322] ARS Routing Plan Table Number

[325] ARS Exception Number

[330] ARS Routing Plan Time Table

[331–346] ARS Routing Plan Table (1–16) (KX-TDA50/KX-TDA100/KX-TDA200 only)

[347] ARS Routing Plan Table (1–48) (KX-TDA600 only)

[350] ARS Carrier Name

[351] ARS Trunk Group for Carrier Access

[352] ARS Removed Number of Digits for Carrier Access

[353] ARS Carrier Access Code

[400] LCOT CO Line Connection

[401] LCOT CO Line Name

[402] LCOT Trunk Group Number

[409] LCOT CO Line Number Reference

[410] LCOT Dialing Mode

[411] LCOT Pulse Rate

[412] LCOT DTMF Minimum Duration

[413] LCOT CPC Signal Detection Time—Outgoing

[414] LCOT CPC Signal Detection Time—Incoming

[416] LCOT Pause Time

[417] LCOT Flash/Recall Time

[418] LCOT Disconnect Time

[450] DIL 1:1 Destination

[451] DID Number (KX-TDA100/KX-TDA200/KX-TDA600 only)

[452] DID Name (KX-TDA100/KX-TDA200/KX-TDA600 only)

[453] DID Destination (KX-TDA100/KX-TDA200/KX-TDA600 only)

[471] Host PBX Access Code

[472] Extension-to-CO Line Call Duration

[473] CO-to-CO Line Call Duration

[475] DISA Silence Detection

[476] DISA Continuous Signal Detection

[477] DISA Cyclic Signal Detection

[490] Caller ID Signal Type

[500] Trunk Group Number

[502] CO Line Call Duration Limitation

[503] Call Transfer to CO Line

[504] Call Forwarding to CO Line

[505] Executive Busy Override

[506] Executive Busy Override Deny

[508] Account Code Mode

[509] TRS Level for System Speed Dialing

[510] TRS Level for Extension Dial Lock

[511] Manager Assignment

[512] Permission for Door Open Access

[514] Time Service Manual Switching

[515] Wireless XDP Parallel Mode for Paired Telephone

[516] Programming Mode Limitation

[600] EXtra Device Port (XDP) Mode

[601] Terminal Device Assignment

Note
	When changing the type of a port for which one or more SDN buttons are set (except when changing between PC Console and Telephone), all SDN buttons customized for that device will be deleted (KX-TDA100/KX-TDA200/KX-TDA600 only).

[602] Class of Service

[603] Extension User Group

[604] Extension Intercept Destination

[605] Call Forwarding—No Answer Time

[620] Incoming Call Distribution Group Member

[621] Incoming Call Distribution Group Delayed Ringing

[622] Incoming Call Distribution Group Floating Extension Number

[623] Incoming Call Distribution Group Name

[624] Incoming Call Distribution Group Distribution Method

[625] Destination for Overflow Time Expiration

[627] Destination When All Busy

[628] Queuing Call Capacity

[629] Queuing Hurry-up Level

[630] Queuing Time Table

[631] Sequences in Queuing Time Table

[632] Maximum Number of Agents

[640] Extension User Groups of a Paging Group

[641] External Pagers of a Paging Group

[650] Extension User Groups of a Pickup Group

[660] VM Group Floating Extension Number

[680] Idle Extension Hunting Type

[681] Idle Extension Hunting Group Member

[690] PS Registration

Notes
	•	Extension numbers of PSs can be a maximum of 4 digits.
	•	Please refer to the Installation Manual for details about PS registration.

KX-TDA50:
→ 2.7.7 Connecting a Cell Station to the Hybrid IP-PBX
KX-TDA100/KX-TDA200:
→ 2.8.7 Connecting a Cell Station to the Hybrid IP-PBX
KX-TDA600:
→ 2.10.7 Connecting a Cell Station to the Hybrid IP-PBX