PANASONIC KX-TDA 50/100/200/600 2.6 Information about the Other Cards

PANASONIC > KX-TDA 50/100/200/600 >

KX-TDA50/100/200/600 INSTALLATION

2.6 Information about the Other Cards

2.6.1 OPB3 Card (KX-TDA0190)

Function

Optional 3-slot base card for mounting a maximum of 3 optional service cards from the following:

•	DPH4 card
•	EIO4 card
•	ECHO16 card
•	MSG4 card

Accessories and User-supplied Items

Accessories (included): none

User-supplied (not included): none

WARNING
	A LITHIUM BATTERY IS USED IN OPB3 CARD. THERE IS A RISK OF EXPLOSION IF THE BATTERY IS REPLACED WITH THE INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.

LED Indications

Indication

Color

Description

CARD STATUS

Green/Red

Card status indication

•	OFF: Power Off
•	Green ON: Normal (all ports are idle)
•	Green Flashing (60 times per minute): Normal (a port is in use)
•	Red ON: Fault (includes reset)
•	Red Flashing (60 times per minute): Out of Service

2.6.2 DPH4 Card (KX-TDA0161)

Function

4-port doorphone card for 4 doorphones and 4 door openers. To be mounted on the OPB3 card.

Accessories and User-supplied Items

Accessories (included): Screws × 3, 10-pin terminal block × 1, 8-pin terminal block × 1

User-supplied (not included): Copper wire

Note
	For details about connection to doorphones and door openers, refer to "2.9.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays".

Pin Assignments

8-pin Terminal Block

No.

Signal Name

Function

DP4

Doorphone 4 transmit

com4

Doorphone 4 receive

DP3

Doorphone 3 transmit

com3

Doorphone 3 receive

DP2

Doorphone 2 transmit

com2

Doorphone 2 receive

DP1

Doorphone 1 transmit

com1

Doorphone 1 receive

10-pin Terminal Block

No.

Signal Name

Function

1-2

Reserved

–

OP4b

Door opener 4

OP4a

Door opener 4 com

OP3b

Door opener 3

OP3a

Door opener 3 com

OP2b

Door opener 2

OP2a

Door opener 2 com

OP1b

Door opener 1

OP1a

Door opener 1 com

2.6.3 EIO4 Card (KX-TDA0164)

Function

4-port external input/output card. To be mounted on the OPB3 card.

Accessories and User-supplied Items

Accessories (included): Screws × 3, 10-pin terminal block × 1, 8-pin terminal block × 1

User-supplied (not included): Copper wire

Note
	For details about connection to external sensors and external relays, refer to "2.9.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays".

Pin Assignments

8-pin Terminal Block

No.

Signal Name

Function

C4b

Control 4

C4a

Control 4 com

C3b

Control 3

C3a

Control 3 com

C2b

Control 2

C2a

Control 2 com

C1b

Control 1

C1a

Control 1 com

10-pin Terminal Block

No.

Signal Name

Function

1-2

Reserved

–

OP4b

Opener 4

OP4a

Opener 4 com

OP3b

Opener 3

OP3a

Opener 3 com

OP2b

Opener 2

OP2a

Opener 2 com

OP1b

Opener 1

OP1a

Opener 1 com

External Sensor

Power to the external sensor is provided from the EIO4 card and must be grounded through the EIO4 card as indicated in the diagram below. A pair of "sensor" and "common" lines are connected to the EIO4 card for each external sensor. The Hybrid IP-PBX detects input from the sensor when the signal is under 100 W.

Connection Diagram

External Relay

Current Limit: 24 V DC/30 V AC, 1 A maximum

2.6.4 ECHO16 Card (KX-TDA0166)

Function

16-channel card for echo cancellation during conferences. To be mounted on the OPB3 card.

Accessories and User-supplied Items

Accessories (included): Screws × 3

User-supplied (not included): none

Note
	To establish a conference call involving 6 to 8 parties, install an ECHO16 card and enable echo cancellation for conferences using the KX-TDA Maintenance Console. For details, refer to "Echo Cancel—Conference" in "2.8.17 [2-9] System Options" of the PC Programming Manual.

2.6.5 MSG4 Card (KX-TDA0191)

Function

4-channel message card. To be mounted on the OPB3 card.

Accessories and User-supplied Items

Accessories (included): Screws × 3

User-supplied (not included): none

2.6.6 CTI-LINK Card (KX-TDA0410)

Function

Ethernet card for CTI communication via 10BASE-T port. CSTA Phase 3 protocol compatible.

Accessories and User-supplied Items

Accessories (included): none

User-supplied (not included): RJ45 connector

Notes
	•	The maximum length of the cable to be connected to this optional service card is 100 m (328 ft).
	•	This optional service card can be connected to PCs on a LAN via a CTI server to provide third party call control CTI. The operating system of the PC or CTI server required for third party call control depends on your CTI application software. For details, refer to the manual for your CTI application software.

Pin Assignments

RJ45 Connector (10BASE-T)

No.

Signal Name

Input (I)/Output (O)

Function

TPO+

Transmit data+

TPO-

Transmit data-

TPI+

Receive data+

4-5

Reserved

–

TPI-

Receive data-

7-8

Reserved

–

LED Indications

Indication

Color

Description

CARD STATUS

Green/Red

Card status indication

•	OFF: Power Off
•	Green ON: Normal
•	Red ON: Fault (includes reset)
•	Red Flashing (60 times per minute): Out of Service

LINK STATUS

Green

Link status indication

•	Flashing: In communication
•	ON: Linked normally