PANASONIC ==> KX-TDA50/100/200/600

KX-TDA50/100/200/600 INSTALLATION

3.3 Installation of the KX-TDA Maintenance Console

3.3.1 Installing and Starting the KX-TDA Maintenance Console

System Requirements

Required Operating System
Microsoftcircler.gif Windowscircler.gif 98 SE, Windows Me, Windows 2000, or Windows XP
Minimum Hardware Requirements
CPU: 300 MHz Intelcircler.gif Celeroncircler.gif microprocessor
HDD: 100 MB of available hard disk space
RAM: 128 MB of available RAM

Installing the KX-TDA Maintenance Console

Notes
Make sure to install and use the latest version of the KX-TDA Maintenance Console.
To install or uninstall the software on a PC running Windows 2000 Professional or Windows XP Professional, you must be logged in as a user in either the "Administrators" or "Power Users" group.
To connect the PC to the Hybrid IP-PBX via USB, the KX-TDA USB driver must be installed. Follow the instructions of the wizard to install the KX-TDA USB driver. When the Hybrid IP-PBX is first connected to the PC via USB, you may be asked to select the appropriate USB driver. Browse for and select the KX-TDA USB driver that was installed previously.
imc3520a.gif
1.
Copy the setup file of the KX-TDA Maintenance Console to your PC. (Its icon is shown here, on the left.)
2.
Double-click the setup file to run the installer.
3.
Follow the on-screen instructions provided by the installation wizard.

Starting the KX-TDA Maintenance Console and Assigning the Basic Items (Quick Setup)

When you start the KX-TDA Maintenance Console with the Installer Level Programmer Code and connect to the Hybrid IP-PBX for the first time after initialization (with the factory default setting), Quick Setup will launch automatically. During Quick Setup, you will set up the basic items. For details about the basic items, refer to "1.14.2 Quick Setup" in the Feature Manual.
 
1.
Connect the PC to the Hybrid IP-PBX with a USB cable.
 
2.
Start the KX-TDA Maintenance Console from the Start menu.
 
3.
"Information Before Programming" appears.
a. Carefully read this important additional information, which includes updates to this and other manuals.
b. Click OK to close this window.
imc3525a.gif
4.
Enter the Installer Level Programmer Code (default: INSTALLER).
The Programmer Code authorizes different programming levels, and the Quick Setup is only available when you start the KX-TDA Maintenance Console with the Installer Level Programmer Code.
Note
There are 2 other Programmer Codes with limited authorization: Administrator Level (default: ADMIN), and User Level (default: USER).
imc3538m.gif
5.
a. Click the check box to connect to the Hybrid IP-PBX. Options will appear as shown here, on the left.
b. Enter the system password for installer (default: 1234).
c. Select "USB", then click OK.
Note
To connect to the Hybrid IP-PBX via USB, the KX-TDA USB driver must be installed on the PC, as explained above in "Installing the KX-TDA Maintenance Console".
qset.gif
7.
Follow the instructions of the Quick Setup wizard and assign the basic items (Quick Setup).
imc3542a.gif
The system menu appears. You may now begin programming the Hybrid IP-PBX.
Notes
During a long programming session, it is highly recommended that you periodically save the system data to the SD Memory Card. If the Hybrid IP-PBX undergoes a sudden power failure or if the system is reset for some reason, all the system data in RAM will be lost. However, if system data has been saved to the SD Memory Card, it can be easily restored.
To save the system data to the SD Memory Card, (1) click the "SD Memory Backup" icon before resetting the Hybrid IP-PBX or turning off the power, or (2) exit the KX-TDA Maintenance Console so that the Hybrid IP-PBX automatically saves the system data.
When programming Hybrid IP-PBX data which can be displayed on a proprietary telephone (PT) (extension names, group names, System Speed Dialing names, etc.), it is possible to enter characters which cannot be displayed on a KX-T7600 series PT.
Characters which can be displayed on a KX-T7600 series PT are shown below in the white cells.
CharCode.gif
The PC will not perform any shutdown operation, or enter the power-saving system standby mode while the KX-TDA Maintenance Console is connected to the Hybrid IP-PBX. To perform either of the operations above, first close the connection to the Hybrid IP-PBX.
CAUTION
Do not remove the SD Memory Card while power is supplied to the Hybrid IP-PBX. Doing so may cause the Hybrid IP-PBX to fail to start when you try to restart the system.