KX-TDA 50/100/200/600 PC PROGRAMMING

PANASONIC > KX-TDA 50/100/200/600 >

KX-TDA 50/100/200/600 PC PROGRAMMING

Table of Contents

1.1	Introduction
1.1.2	Entering Characters
1.2	PC Programming
1.2.1	Installing and Starting the Maintenance Console
1.2.2	Password Security

2	KX-TDA Maintenance Console Operating Instructions

2.1	Introduction
2.1.1	Starting Maintenance Console and Software Modes
2.1.2	Access Levels
2.1.3	Software Interface
2.1.4	Card Status
2.1.5	Display Options
2.1.6	Extension Number Setting
2.2	File
2.2.1	File—New
2.2.2	File—Open
2.2.3	File—Close
2.2.4	File—Save
2.2.5	File—Save As
2.2.6	File—Exit
2.3	Connect
2.3.1	Connect—RS-232C
2.3.2	Connect—USB
2.3.3	Connect—LAN
2.3.4	Connect—Modem
2.3.5	Connect—Profile Setup
2.3.6	Connect—Profile Editor
2.3.7	Connect—Disconnect
2.4	Tool
2.4.1	Tool—SD memory backup
2.4.2	Tool—NDSS Link Data Clear
2.4.3	Tool—DXDP All OUS
2.4.4	Tool—Simplified Voice Message—Delete All Recordings (KX-TDA50 only)
2.4.5	Tool—Simplified Voice Message—Check Current Usage (KX-TDA50 only)
2.4.6	Tool—Extension List View
2.4.7	Tool—Import
2.4.8	Tool—Export
2.4.9	Tool—Programmer Code Change
2.4.10	Tool—Screen Customize—User Level/Administrator Level
2.4.11	Tool—System Data Convert (KX-TDA50/KX-TDA100/KX-TDA200 only)
2.5	Utility
2.5.1	Utility—Diagnosis
2.5.2	Utility—File Transfer PC to PBX (SD Card)
2.5.3	Utility—File Transfer PBX (SD Card) to PC
2.5.4	Utility—SD Card File View and Load
2.5.5	Utility—SD Card File Delete
2.5.6	Utility—Message File Transfer PC to PBX
2.5.7	Utility—Message File Transfer PBX to PC
2.5.8	Utility—Error Log
2.5.9	Utility—T1 Signaling Bit Monitor (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.5.10	Utility—T1 Line Trace (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.5.11	Utility—ISDN/QSIG Protocol Trace
2.5.12	Utility—Digital Trunk Error Report (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.5.13	Utility—IP Extension Statistical Information
2.5.14	Utility—CS Information
2.5.15	Utility—PS Information
2.5.16	Utility—Timed Update (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.5.17	Utility—System Reset—Reset by the Command
2.5.18	Utility—Flash ROM ID Information
2.6	Help
2.6.1	Frequently Asked Questions (FAQ)
2.7	[1] Configuration
2.7.1	[1-1] Slot
2.7.2	[1-1] Slot—Summary
2.7.3	[1-1] Slot—MPR Card Property
2.7.4	[1-1] Slot—Extension Card Property
2.7.5	[1-1] Slot—Extension Port
2.7.6	[1-1] Slot—Extension Port—Port Command
2.7.7	[1-1] Slot—Extension Port—Port Type View
2.7.8	[1-1] Slot—CSI/F Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.7.9	[1-1] Slot—CSI/F Port—Port Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.7.10	[1-1] Slot—LCO Card Property
2.7.11	[1-1] Slot—LCO Port
2.7.12	[1-1] Slot—LCO Port—Port Command
2.7.13	[1-1] Slot—PRI Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.7.14	[1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.7.15	[1-1] Slot—PRI Port—Port Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.7.16	[1-1] Slot—T1 Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.7.17	[1-1] Slot—T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.7.18	[1-1] Slot—T1 Port—Channel Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.7.19	[1-1] Slot—IP-GW Card Property
2.7.20	[1-1] Slot—IP-GW Port
2.7.21	[1-1] Slot—IP-GW Port—Port Command
2.7.22	[1-1] Slot—IP-Extension Card Property
2.7.23	[1-1] Slot—IP-Extension Card Property—Common Settings
2.7.24	[1-1] Slot—IP-Extension Port
2.7.25	[1-1] Slot—OPB (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.7.26	[1-1] Slot—OPB Card Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.7.27	[1-1] Slot—OPB3 Option Card Setup (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.7.28	[1-1] Slot—CTI-LINK Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.7.29	[1-1] Slot—DPH Card Property (KX-TDA50 only)
2.7.30	[1-1] Slot—DPH Port Command (KX-TDA50 only)
2.7.31	[1-2] Portable Station
2.7.32	[1-3] Option
2.7.33	[1-4] Clock Priority (KX-TDA100/KX-TDA200/KX-TDA600)
2.8	[2] System
2.8.1	[2-1] Date & Time/Daylight Saving
2.8.2	[2-1] Date & Time/Daylight Saving—Date & Time Setting
2.8.3	[2-2] Operator & BGM
2.8.4	[2-3] Timers & Counters
2.8.5	[2-4] Week Table
2.8.6	[2-4] Week Table—Time Setting
2.8.7	[2-5] Holiday Table
2.8.8	[2-6-1] Numbering Plan—Main
2.8.9	[2-6-2] Numbering Plan—Quick Dial
2.8.10	[2-6-3] Numbering Plan—B/NA DND Call Feature
2.8.11	[2-7-1] Class of Service—COS Settings
2.8.12	[2-7-2] Class of Service—External Call Block
2.8.13	[2-7-3] Class of Service—Internal Call Block
2.8.14	[2-8-1] Ring Tone Patterns—Call from CO
2.8.15	[2-8-2] Ring Tone Patterns—Call from Doorphone
2.8.16	[2-8-3] Ring Tone Patterns—Call from Others
2.8.17	[2-9] System Options
2.8.18	[2-10] Extension CID Settings
2.8.19	[2-11-1] Audio Gain—Paging/MOH
2.8.20	[2-11-2] Audio Gain—Card (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.9	[3] Group
2.9.1	[3-1-1] Trunk Group—TRG Settings
2.9.2	[3-1-2] Trunk Group—Local Access Priority
2.9.3	[3-2] Extension Group
2.9.4	[3-3] Call Pickup Group
2.9.5	[3-3] Call Pickup Group—All Setting
2.9.6	[3-4] Paging Group
2.9.7	[3-4] Paging Group—All Setting
2.9.8	[3-4] Paging Group—External Pager
2.9.9	[3-5-1] Incoming Call Distribution Group—Group Settings
2.9.10	[3-5-2] Incoming Call Distribution Group—Queuing Time Table
2.9.11	[3-5-3] Incoming Call Distribution Group—Miscellaneous
2.9.12	[3-5-4] Incoming Call Distribution Group—Member
2.9.13	[3-6] Extension Hunting Group
2.9.14	[3-6] Extension Hunting Group—Member List
2.9.15	[3-7-1] VM(DPT) Group—System Settings
2.9.16	[3-7-2] VM(DPT) Group—Unit Settings
2.9.17	[3-7-2] VM(DPT) Group—Unit Settings—Member List
2.9.18	[3-8-1] VM(DTMF) Group—System Settings
2.9.19	[3-8-2] VM(DTMF) Group—Group Settings
2.9.20	[3-8-2] VM(DTMF) Group—Group Settings—Member List
2.9.21	[3-9] PS Ring Group
2.9.22	[3-9] PS Ring Group—Member List
2.10	[4] Extension
2.10.1	[4-1-1] Wired Extension—Extension Settings
2.10.2	[4-1-1] Wired Extension—Extension Settings—CLIP Generate
2.10.3	[4-1-2] Wired Extension—FWD/DND
2.10.4	[4-1-3] Wired Extension—Speed Dial
2.10.5	[4-1-4] Wired Extension—Flexible Button
2.10.6	[4-1-4] Wired Extension—Flexible Button—Flexible Button Data Copy
2.10.7	[4-1-5] Wired Extension—PF Button
2.10.8	[4-1-6] Wired Extension—NDSS Link Data - Send
2.10.9	[4-1-7] Wired Extension—Simplified Voice Message (KX-TDA50 only)
2.10.10	[4-2-1] Portable Station—Extension Settings
2.10.11	[4-2-1] Portable Station—Extension Settings—CLIP Generate
2.10.12	[4-2-2] Portable Station—FWD / DND
2.10.13	[4-2-3] Portable Station—Flexible Button
2.10.14	[4-2-3] Portable Station—Flexible Button—Flexible Button Data Copy
2.10.15	[4-2-4] Portable Station—NDSS Link Data - Send
2.10.16	[4-2-5] Portable Station—Simplified Voice Message (KX-TDA50 only)
2.10.17	[4-3] DSS Console—Flexible Button
2.10.18	[4-3] DSS Console—Flexible Button—Flexible button Data Copy
2.11	[5] Optional Device
2.11.1	[5-1] Doorphone
2.11.2	[5-2] External Pager
2.11.3	[5-3-1] Voice Message—DISA System
2.11.4	[5-3-2] Voice Message—DISA Message
2.11.5	[5-3-3] Voice Message—SVM (KX-TDA50 only)
2.11.6	[5-4] External Relay
2.11.7	[5-5] External Sensor
2.12	[6] Feature
2.12.1	[6-1] System Speed Dial
2.12.2	[6-2] Caller ID Modification
2.12.3	[6-3] Verification Code
2.12.4	[6-4] Second Dial Tone
2.12.5	[6-5] Absent Message
2.12.6	[6-6] Tenant
2.12.7	[6-7] Dialing Plan
2.12.8	[6-7] Dialing Plan—Auto Assign
2.12.9	[6-8] Hotel
2.13	[7] TRS
2.13.1	[7-1] Denied Code
2.13.2	[7-2] Exception Code
2.13.3	[7-3] Special Carrier Code
2.13.4	[7-4] Emergency Dial
2.13.5	[7-5] Miscellaneous
2.14	[8] ARS
2.14.1	[8-1] System Settings
2.14.2	[8-2] Leading Number
2.14.3	[8-3] Routing Plan Time
2.14.4	[8-3] Routing Plan Time—Time Setting
2.14.5	[8-4] Routing Plan Priority
2.14.6	[8-5] Carrier
2.14.7	[8-6] Leading Number Exception
2.14.8	[8-7] Authorization Code for TRG
2.15	[9] Private Network
2.15.1	[9-1] TIE Table
2.15.2	[9-2] Network Data Transmission
2.15.3	[9-3] Network Operator (VoIP)
2.15.4	[9-4] NDSS Key Table
2.16	[10] CO & Incoming Call
2.16.1	[10-1] CO Line Settings
2.16.2	[10-2] DIL Table & Port Settings
2.16.3	[10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.16.4	[10-3] DID Table—Automatic Registration (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.16.5	[10-3] DID Table—Name Generate (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.16.6	[10-4] Miscellaneous
2.17	[11] Maintenance
2.17.1	[11-1] Main
2.17.2	[11-2] PT Programming Access
2.17.3	[11-3] Power Failure Transfer (KX-TDA100/KX-TDA200/KX-TDA600 only)

Appendix

3.1	Revision History
3.1.1	KX-TDA100/KX-TDA200 PMPR Software File Version 3.2xxx
3.1.2	KX-TDA50 PSMPR Software File Version 4.0xxx
3.2	Feature Programming References